How to Replace a Color Display

If a Color Display would break, they are easily replaced with a new spare part.

Tools needed:

• Set of Allen wrenches (3 mm)
• Flat-side cutters
• A few replacement zip ties (if necessary)
• The replacement Display from Keego

Remove the Color Display and Remote

1. 1. Get the ebike ready for maintenance. Turn off the bike, remove the battery, and press the power button to discharge any remaining power.
   2. Unplug the Color Display and Remote connectors. Trace the cable from the back of the Color Display to the wiring harness and gently pull the connector out of the display without twisting. Then trace the cable from the remote to the back of the Color Display, and gently pull the cable out without twisting to remove. You may need to manually unwrap the cable cover to unplug the cable.
   3. Remove the Color Display. Use a 3mm Allen wrench to remove the bolts on the display clamp, and then remove from the handlebar.
   4. Remove the Remote. Use a 3 mm Allen wrench to remove the remote bolt, and then remove it from the handlebar.
   5. Complete.

Install a New Color Display and Remote

1. Pass the display clamp over the handlebar center and use a 3 mm Allen wrench to tighten both bolts until secure. Adjust the display so it is visible to the rider.
2. Install the Remote. Pass the remote clamp over the handlebar next to the grip, and use a 3 mm Allen wrench to tighten the bolt until secure.
3. Connect the Color Display and Remote. Connect the Color Display connector to the wiring harness by lining up the internal notches and pins (and external arrows) and push the connector ends directly together, without twisting, to connect. Then trace the cable from the remote to the input on the back of the display and ensure the connector is fully inserted. Re-wrap the cable cover around the connectors as needed, and replace any zip ties you may have needed to cut.
4. Power on the ebike. Install the battery and press the Power button on the remote to power on the ebike. Verify the new display is working
5. Complete